Electrolux U24211 EFT 535 Betriebs- und Installationsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Electrolux U24211 EFT 535 herunter. Electrolux U24211 EFT 535 15 Seiten. Electrolux range hood operation and installation manual
Seite drucken
Maintenance and Care
• The hood must always be disconnected from the electricity supply before beginning any maintenance
work.
Cleaning the hood
• Clean the outside of the hood using a damp
cloth and a mild detergent.
• Never use corrosive, abrasive or flammable
cleaning products.
• Never insert pointed objects in the motor's
protective grid.
• Wash the outside surfaces using a delicate
detergent solution. Never use caustic detergents
or abrasive brushes or powders.
• Only ever clean the switch panel and filter
grille using a damp cloth and delicate
detergents.
• It is extremely important to clean the unit and
change the filters at the recommended intervals.
Failure to do so will cause grease deposits to
build up that could constitute a fire hazard.
Metal grease filter (EFT 635-535)
• The purpose of the grease filters is to absorb
grease particles which form during cooking and
it must always be used, either in the external
extraction or internal recycling function.
Attention: the metal grease filters must be
removed and washed, either by hand or in the
dishwasher, every four weeks.
Removing the metal grease filter
First pull the latches backwards (a), then
extract the grille outwards (b).
Hand washing
Soak grease filters for about one hour in hot
water with a little washing-up liquid added,
then rinse off thoroughly with hot water. Repeat
the process if necessary. Refit the grease filters
when they are dry.
Dishwasher
Place grease filters in the dishwasher. Select
most powerful washing programme and highest
temperature, at least 65°C. Repeat the process.
Refit the grease filters when they are dry.
When washing the metal grease filter in the
dishwasher a slight discolouration of the filter
can occur, this does not have any impact on its
performance.
• Clean the inner housing using a hot detergent
solution only (never use caustic detergents,
abrasive powders or brushes).
Warning
• Failure to observe the instructions on cleaning
the unit and changing the filters will cause a
fire hazard. You are therefore strongly
recommended to follow these instructions.
• The manufacturer declines all responsibility for
any damage to the motor or any fire damage
linked to inappropriate maintenance or failure
to observe the above safety recommendations.
Latch - EFT 630 - EFT 530
Latch - EFT 635 - EFT 535
Fig. 4 -Removing the metal grease filter
Latch
Grid
Fig. 5 - Paper Grease filter
35
Latch
Grease
filter
Stops