GETTING STARTED (Picture page 3)
1
Setting/changing time. Plug in the machine, the display will flash the initial time showing: 12:00. Press
the HOUR and MIN button to set the required time. Time can only be changed under standby mode,
cannot be changed under program/working mode. Simply press the HOUR and MIN button, the time
changes at once. Note: if you unplug the machine, the time needs to be set again.
2 Place the machine on a flat surface. When starting the machine for the first time, fill the tank with cold
water. Start the machine with the START/STOP button. Let a full tank of water pass through the machine
once or twice to clean it, without using filter or coffee.
3 Making coffee: open the lid and fill the water tank with fresh cold water up to the desired level. There
is a water level indicator on the water tank and on the coffee jug.
4 Insert the permanent coffee filter or a size 1x4 paper filter in the filter holder and fill it with ground
coffee. For average strong coffee 6-7g coffee powder per cup is sufficient. Close the water tank lid
and place the jug back (complete with lid).
5 Setting/changing delay time. Press PROG button, then release the program PROG button, the display
will flash the initial time showing: 12:00 and a clock icon. Set hours by pressing the HOUR button. Then
set minutes by pressing the MIN button. Press the PROG button again to confirm, the display will stop
flashing time and clock icon. Clock icon is constantly on and the display will go back to show the
current time immediately.
Note: If user don't press HOUR or MIN button again, the display will go back to show the current time
after 5 seconds, and setting delay time is cancelled, clock icon will disappear.
6 Start the machine with the START/STOP button. The power indicator light will come on and hot water
will flow into the filter. If the machine is not turned off manually, the Safety Auto-Off function turns it off
after 40 minutes.
7 If the jug is removed, the filter valve prevents coffee from dripping onto the warming plate. (While
preparing coffee, the jug must not be removed for longer than 30 seconds or the filter will overflow.)
8 The Aroma Selector extends the brewing time to maximize the flavour extraction and get a stronger
coffee for a small number of cups (normally less than 6).
9 The machine is compatible with Electrolux PureAdvantage
water purification filter, it's recommended to change filter after 60 brew cycles. Before using the new
filter, place the new filter into a container of clean cool water, and let it soak for 10 minutes. Then rinse
the filter for 10 to 15 seconds under the running tap water.
*available in certain models only
CLEANING AND CARE
10 Turn the machine off and unplug the power cord. Wipe all outer surfaces with a damp cloth. Coffee
jug and jug lid are dishwasher proof. Never use caustic or abrasive cleaners, and never immerse the
machine in liquid!
11 To clean the filter holder, lift up the handle and remove the filter holder. To clean the filter valve
thoroughly, push it several times while it is being rinsed. The filter holder can also be washed in the
dishwasher.
www.electrolux.com
water filter*. If you choose to use the
TM
EN
EN
KR
TH
5
Seite drucken