ADVANCED Network Devices IPSCB Einrichtung - Seite 2
Blättern Sie online oder laden Sie pdf Einrichtung für Redner ADVANCED Network Devices IPSCB herunter. ADVANCED Network Devices IPSCB 2 Seiten. Ip call box
Seite drucken
ACCESS THE DEVICE
Use one of these ways to access the device:
• Enter the IP address assigned by the DHCP server
in your browser.
• Enter the
IPv6 link-local address in a browser
formatted as
http://[fe80::2246:f9ff:feXX:XXXX]
(XX:XXXX = last 6 digits of MAC address).
• Double-click on the device in the ClockWise
Endpoints list to open the web server interface.
•
For third-party software applications, consult
guide for method (often uses configuration file).
OPERATION
The button LED lights red during microphone
activation.
CONFIGURATION OPTIONS
The device ships with these default settings:
Push-to-Talk 1 Trigger Only
Configuration File Setup
SIPConfig tag:
<SIPConfig
push_to_talk_ip1_trigger_mode="1" />
REGISTRED SIP CALL
Register the IP Call Box device to an SIP server to
call an SIP phone or ring a group.
Configuration File Parameters
SIPConfig tag (values included for example):
<SIPConfig
push_to_talk_ip1="301" />
Web Server Settings
• Go to Device Settings
• Under SIP GPIO Input Action Settings, set
Push-to-Talk 1 to the SIP extension the device
should call.
•
Select Save and Apply to save changes.
DIRECT SIP CALL
Call a SIP phone directly without registration to a
SIP server.
Advanced Network Devices • 3820 Ventura Dr. Arlington Heights, IL 60004
"Yes"
SIP.
• 847-463-2237 •
Configuration File Parameters
SIPConfig tag (values included for example):
<SIPConfig
push_to_talk_ip1="sip:[email protected]"
/>
Web Server Settings
• Go to Device Settings
• Under SIP GPIO Input Action Settings, set
Push-to-Talk 1 to the SIP extension the device
should call.
• Select Save and Apply to save changes.
PUSH AND HOLD SIP CALL
In addition to the Push-to-Talk call, configure a
second action (registered or direct SIP call) to dial
a different SIP extension when holding the button
for a specified time or longer.
Configuration File Parameters
SIPConfig tag (values included for example):
<SIPConfig
push_to_talk_ip1_alt="301"
push_to_talk_ip1_alt_ms="2000"
/>
Web Server Settings
• Go to Device Settings
• Under SIP GPIO Input Action Settings, set
Push-to-Talk 1 Alternate to the SIP extension
the device should call when held for the
desired duration.
• Set Push-to-Talk 1 Alternate Hold Time to the
desired duration (in milliseconds) to hold the
button to trigger the call.
• Select Save and Apply to save changes.
SIP Configuration:
https://www.ipspeaker.com/support30/help/setti
ngs.html#sip
User Support:
https://www.anet.com/user-support/
AND Limited Warranty:
https://www.anetd.com/warranty/
Legal Disclaimer:
www.anetd.com/
2
IP Call Box
(IPSCB) Installation
SIP.
SIP.
RESOURCES
https://www.anetd.com/legal/
v1.3