en Cleaning assistance
14.3 Cleaning self-cleaning surfaces in the
cooking compartment
The back panel in the cooking compartment is self-
cleaning. The self-cleaning surfaces are coated with a
porous, matte ceramic layer and have a coarse sur-
face. When the appliance is in operation, the self-clean-
ing surfaces absorb splashes from baking, roasting or
grilling and break them down. If the self-cleaning sur-
faces no longer clean themselves adequately during
operation, heat up the cooking compartment specific-
ally to the right temperature.
ATTENTION!
If you do not clean the self-cleaning surfaces regularly,
they may become damaged.
If dark stains are visible on the self-cleaning sur-
▶
faces, heat up the cooking compartment.
Do not use oven cleaner or abrasive cleaning aids.
▶
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately us-
ing water and a sponge cloth. Do not rub.
1.
Remove accessories and cookware from the cook-
ing compartment.
15 Cleaning assistance
The cleaning assistance is a quick alternative for occa-
sionally cleaning the cooking compartment. The clean-
ing assistance softens dirt by vaporising the soapy wa-
ter. It is then easier to remove dirt.
15.1 Setting the cleaning assistance
WARNING ‒ Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
Never pour water into the cooking compartment
▶
when the cooking compartment is hot.
Requirement: The cooking compartment has cooled
down completely.
Remove the accessories from the cooking compart-
1.
ment.
Mix 0.4 litres water with a drop of washing-up liquid
2.
and pour into the centre of the cooking compart-
ment floor.
Do not use distilled water.
3.
Press
.
Use the control ring to set the bottom heating
4.
Press
.
5.
6.
Use the control ring to set the temperature to
80 °C.
Press
.
7.
Use the control ring to set the cooking time to
8.
four minutes.
Press to start.
9.
16
Detach the shelf supports and remove them from
2.
the cooking compartment.
→ "Rails", Page 17
Remove coarse dirt using soapy water and a soft
3.
cloth:
– From the smooth enamel surfaces
– From the inside of the appliance door
– From the glass cover on the oven light
This prevents stains that cannot be removed.
Remove any objects from the cooking compartment.
4.
The cooking compartment must be empty.
Set the 4D hot air type of heating.
5.
Set the maximum temperature.
6.
Start the operation.
7.
8.
Switch off the appliance after one hour.
Once the appliance has cooled down, wipe the
9.
cooking compartment with a damp cloth.
Note: Marks may appear on the self-cleaning sur-
faces. Residues of sugar and egg white in the food
are not removed and stick to the surfaces. Red
stains are residues from salty food – they are not
rust. The stains are not hazardous to health. These
marks do not impair the cleaning ability of the self-
cleaning surfaces.
Attach the shelf supports.
10.
→ "Rails", Page 17
a The appliance starts to heat and the cooking time
counts down.
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
10.
Use
to switch the appliance off and leave the
cooking compartment to cool for approx.
20 minutes.
15.2 Wiping down the cooking compartment
ATTENTION!
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
After using the cleaning assistance, wipe the cook-
▶
ing compartment and allow it to dry completely.
Requirement: The cooking compartment must have
cooled down.
Open the appliance door and remove the remaining
1.
water with an absorbent sponge cloth.
Clean the smooth surfaces in the cooking compart-
2.
ment with a dish cloth or a soft brush. Remove stub-
born food remnants using a stainless steel scouring
.
pad.
Remove limescale with a cloth soaked in vinegar.
3.
Then wipe with clean water and rub dry with a soft
cloth (including under the door seal).
In order to dry the cooking compartment, leave the
4.
appliance door open in the detent position (approx.
30°) for approx. one hour.
Seite drucken