Atlantis A08-LN1200 Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Barcode-Leser Atlantis A08-LN1200 herunter. Atlantis A08-LN1200 2 Seiten.

Seite drucken

How Do You Program Scanner?

Scan Start Configuration

Output Character Parameters – Terminator

The factory default terminator is CR

Start Configuration

Scan all necessary able for parameters that

Meet your application

Interface selection

Reading mode

Language .........etc.

Interface selection

The scanner is designed to switch easily from interfaces.

Scan end configuration to save to save the changes.

Remember to reset the interface before changing to PS/2

or RS232 cable. No presetting is requested for USB

interface. Scanning the barcode after the cable is changed

and activate the scanner by plugging again the cable.

End Configuration

Resetting The Standard Product Defaults

If you aren't sure what programming options are in your scanner,

or you've changed some options and want the factory settings

restored, scan the bar code below.

Standard Product Default Setting

Interface Selection

The scanner is designed to switch easily from interfaces.

Remember to reset the interface before changing to PS/2 or

RS232 or USB cable.

KEYBOARD

* HID USB

Emulate External Keyboard

Scan the barcode below if you do not have an external keyboard.

After scanning the Emulate External Keyboard bar code, you must

power cycle your computer.

enable

Language For Keyboard Interface

* KEYBOARD

Multi-Language Support

RS-232

Scanning Mode Selection

USB

* Good Read Off

Flash Mode

Continuous/Trigger off

Terminator selection – Keyboard & USB

RS-232

RS-232 communication setting

- Baud Rate

USB –Com Port Emulation

* Disable

- Data bit

- Stop bit

* US

- Parity

Trigger On/off

Flash/auto power on

Continuous/auto power on

None

* CR

Tab

CR+LF

1200bps

2400bps

4800bps

*9600bps

19200bps

38400bps

7 bits

8 bit

* 1 stop bit

2 stop bit

* none

odd

even

mark

Space