Drill Master 95578 Handbuch für Einrichtung und Betrieb - Seite 15
Blättern Sie online oder laden Sie pdf Handbuch für Einrichtung und Betrieb für Schleifer Drill Master 95578 herunter. Drill Master 95578 20 Seiten. 4-1/2” angle grinder
Auch für Drill Master 95578: Montage- und Betriebsanleitung (16 seiten)
Seite drucken
The power cord must reach the work
area with enough extra length to
allow free movement while working.
3.
Secure loose work pieces using
a vise or clamps (not included) to
prevent movement while working.
4.
There must not be hazardous
objects, such as utility lines or foreign
objects, nearby that will present a
hazard while working.
5.
You must use personal safety
equipment including, but not limited
to, ANSI-approved eye and hearing
protection, as well as heavy work
gloves.
6.
Before beginning work, provide for
sparks and debris that will fly off the
work surface.
General Operating Instructions
Grip the tool firmly in both
hands.
1.
Turn the tool off. Then, plug in the
tool.
2.
Press the Switch forward to turn the
tool on. Never depress the Spindle
Lock Button (22N) when starting
the grinder, or while it is running.
3.
Allow the tool to come up to full
speed before touching the work
material.
4.
Apply the wheel to the work material
at about a 10°-15° angle, allowing the
tool to operate at full speed. If the tool
bogs down, use lighter pressure.
SKU 95578
TO PREVENT
SERIOUS INJURY:
For technical questions, please call 1-800-444-3353.
5.
To create a smoother surface,
keep the tool moving over the work
surface.
6.
Pull the Switch backward to turn the
tool off.
7.
Allow the tool to come to a complete
stop before setting it down.
8.
To prevent accidents, turn off the
tool and disconnect its power supply
after use. Clean, then store the tool
indoors out of children's reach.
Maintenance And Servicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the
tool off and unplug the tool
from its electrical outlet
before performing any
inspection, maintenance, or
cleaning procedures.
TO PREVENT SERIOUS
INJURY FROM TOOL
FAILURE:
Do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
TO PREVENT
SERIOUS INJURY
REV 10b; 10d
Page 15