21st Century Alarms LuxHome Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitssystem 21st Century Alarms LuxHome herunter. 21st Century Alarms LuxHome 5 Seiten. Wireless alarm system

Seite drucken
st
21
Century Alarms
Alarm & CCTV Solutions
www.21stcenturyalarms.co.uk
Auto Dialler
Once the Call from the Alarm's Auto Dialler has been received:
During or after the message is played, Press
the call and stop the Auto Dialler dialling numbers 2 and 3.
The Auto-dialler with respond with a Tone and then hang up.
Reset Alarm Following Activation
Following an Activation of the Alarm, Disarm as normal, the control Panel will display the
Zone that has been triggered. (Flashing LED over the Zone Number).
Press:
To reset Alarm and Clear Display (display reverts to normal after 5 minutes)

Changing the User Code

1. Enter Programming mode, as detailed below.
The Arm and Part-Arm LEDs will illuminate and all Zone, Fire and tamper LEDs will flash.
The system is now in Programme Mode.
2.
3. Enter a new 4 digit User Access code. As each digit is entered an illuminated zone LED
will be turned OFF.
4.
Security House, 107 Sandwich Close, Blackburn, Lancashire BB1 1PU
01254 265052
"*"
Zone LEDs 1-4 will illuminate.
0775 1360143
Intruder Alarms: Wired & Wireless
Alarm Central Monitoring
Commercial & Domestic CCTV
Alarm Service, Upgrades and Repairs
on your phones keypad to acknowledge