Atlas SM82T-W Spezifikationen - Seite 2

Blättern Sie online oder laden Sie pdf Spezifikationen für Redner Atlas SM82T-W herunter. Atlas SM82T-W 3 Seiten. Surface mount loudspeakers
Auch für Atlas SM82T-W: Spezifikationen (2 seiten), Benutzerhandbuch (13 seiten), Benutzerhandbuch (15 seiten), Benutzerhandbuch (13 seiten)

Seite drucken

Care should be taken to ensure that the chosen fixing point is strong

enough to support the SM82T. Care should also be taken to ensure

that the SM82T is not exposed to direct precipitation. A

threaded hole is provided on the C-bracket to allow the SM82T series

speaker to be mounted on any Atlas Sound microphone stand for

near-field live sound applications. Four brass inserts are also provided

on the bottom of the SM82T to accommodate OMNIMOUNT™ 75

series brackets. All inserts for mounting knobs are standard

allow easy substitution of off-the-shelf vandal proof torx head or "one-

way" hardware. Input connectors include a two pole barrier strip with

wire capture "caps" capable of accepting up to (2) #14AWG cable. 1.9,

3.8, 7.5, 15, 30, and 60 watt taps are screwdriver selectable via a sealed

switch located near the input section on the rear of the cabinet.

A "tongue in groove" cover with rubber wire exit grommet is provided

to protect the input connections and transformer switch assembly.

Systems are available in black or white and can be painted to

accommodate any architectural considerations.

ARCHITECT AND ENGINEER SPECIFICATIONS

The indoor/outdoor mini-loudspeaker system shall be Atlas Sound

Model __________ (SM82T-B or SM82T-W) or approved equal.

Assemblies shall consist of 2-way, woofer and tweeter, within

environment-resistant housings. Enclosure shall be constructed

FUNDAMENTAL

HARMONIC

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 / FAX (800) 765-3435

⁄

"-27

⁄

"-20 to

SM82T Frequency Response

(Transformer Bypassed)

FREQUENCY (Hz)

SM82T Harmonic DIstortion

FREQUENCY (Hz)

Specifications subject to change without notice

Printed in U.S.A.

of paintable UV-resistant, talc impregnated, polypropylene injection

molded plastic finished in black (SM82T-B) or white (SM82T-W).

Each unit shall include a stamped, powder coated, aluminum grille

and removable C-shaped mounting bracket. All hardware inserts shall

be brass and threaded

⁄

"-20. The 150 Watt RMS system shall have a

8" (133mm) HYCONE™ treated woofer, and a 1" exit compression

driver frequency device. The dividing network crossover frequency

shall be 2.5 kHz. The dividing network shall include protection circuits

for the high-frequency component. Each unit shall include an internally

mounted 60 Watt 70.7V/100V line matching transformer for use in

distributed sound applications. Wattage taps shall be screwdriver

selectable via a sealed switch located near the input section. Wattage

taps shall be 1.9, 3.8, 7.5, 15, 30, and 60 Watts @ 70.7V. The loud-

speaker system shall meet the following performance criteria: Power

handling, 150 Watts RMS (Transformer limited); Frequency response,

±3dB from 65 Hz to 20 kHz;. Pressure sensitivity, 92dB SPL at one

watt, 100 Hz to 10 kHz measured at a distance of one meter on axis.

Input connectors shall include a two-pole barrier strip capable of

accepting up to (2) #14AWG cable. A tongue-in-groove cover with rubber

wire exit grommet shall be provided to protect the input connectors

from corrosion. The loudspeaker system shall exhibit no performance

or cosmetic degradation after a 100 hour salt spray test per ASTM

B117. The unit shall be 16

⁄

"high x 9

AtlasSound.com

000202

⁄

"wide x 8

⁄

"deep.

1 6

SL1-1194