Atlas AA100PHD Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Atlas AA100PHD herunter. Atlas AA100PHD 20 Seiten. Mixer amplifier

AA100PHD

Owner's Manual

100W Mixer Amplifier

Front Panel

7. Input 1-4 Level

The rotary control varies the amplitude of the signal fed to the amplifier input. Turn clockwise to increase and counter-clockwise to

decrease the signal level.

8. Master Level

The Master Level control will raise or lower all the input channels together. A good starting point for setting gain structure is to set the

Master Level control at the 12:00 position, and then adjust the individual channels one at a time.

Rear Panel

9 10

1. Bass Control

Normally set at the 12:00 position, rotating clockwise will increase (boost) bass frequencies to a maximum of +6dB at 100Hz. Rotating

counter-clockwise from the 12:00 position will decrease (cut) bass frequencies to a maximum of -6dB at 100Hz.

2. Treble Control

Normally set at the 12:00 position, rotating clockwise will increase (boost) treble frequencies by +6dB at 10kHz. Rotating

counter-clockwise from the 12:00 position will decrease (cut) treble frequencies by -6dB at 10kHz.

3. Input 1

Balanced Microphone or Line level signals connect to the (+), (-), and (G) terminals. To select between Mic or Line input levels, refer

to the DIP switch chart on the rear of the amplifier for feature assignment. If connecting an unbalanced line level input, tie (short) the

(G) and (-) terminals together for negative or ground connection and the positive or (+) signal to the (+) terminal on the amplifier input.

If the input is used in Mic mode, Phantom power for condenser type microphones is available in the DIP switch settings on the rear

panel. Input 1 level control located on the front panel adjusts the levels to the amplifier mix.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

– 7 –

AtlasSound.com

Specifications are subject to change without notice.