Atlas SEST-18S Spezifikationen - Seite 2
Blättern Sie online oder laden Sie pdf Spezifikationen für Lautsprechersystem Atlas SEST-18S herunter. Atlas SEST-18S 2 Seiten. Informacast ip compliant loudspeaker system powered by cisco poe network switches
Seite druckenUnit shall be Atlas Sound Model I8S. The loudspeaker system shall
include factory assembled loudspeaker, IP addressable PCB amplifier/
control and metal baffle.The loudspeaker shall have a 10oz (260g)
ceramic magnet and a seamless cone. Frequency response range
shall be 86Hz to 8kHz (-3dB). Sensitivity shall be 94dB average. Voice
coil former shall be black anodized aluminum to help dissipate heat,
have an impedance of 8 Ohms and a diameter of 1" (25mm). The IP
addressable PCB amplifier/control shall be mounted to the rear of the
loudspeaker baffle via concealed weld studs. The amplifier / control
PCB shall be capable of producing 9 Watts RMS with a minimum
of 9VDC power provided either locally or via Cisco IEEE 802.3AF
Loudspeaker Specifi cations
Speaker Size
8" (203mm)
Power Handling
15W
Sensitivity (SPL @ 1W/1M)
94dB
1
Frequencey Response
86Hz to 8kHz
2
Dispersion
52.5˚
Cone Material
Treated Paper
Surround Material & Dampening
Dampened self-storage
Flux Density
10,600 Gauss, 1.06 Tesla
Magnet Weight
Nominal, 10oz (260g)
Basket Material
Stamped, Plated 20 ga. CRS
Voice Coil Diameter
1" (25mm)
Voice Coil Material
Cooper
Voice Coil Former Material
Black Anodized Aluminum
Voice Coil Winding Width
0.225 (6mm)
Top Plate Thickness
.239 (96mm)
Weight
32oz (908g)
Diameter &Depth
8.125 (206mm) Dia. & 2.875" (73mm) D
Mounting Dimensions
7.625" (194mm) Bolt Circle
1. Measured in reccomended enclosure 2. 3dB down point, 2 kHz octave band
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
© 2006 Atlas Sound LP
ARCHITECT AND ENGINEER SPECIFICATIONS
Microphone Specifi cation
Microphone Type
Diameter
Baffl e Specifi cations
Baffl e material
Overall Width x Height
Depth - Front of baffl e to rear of speaker
Depth - Rear of baffl e to rear of speaker
Color
Amplifi er/Controller Specifi cations
Power Rating
Inputs
Outputs
Power Source
Dimensions
Mounting
Network Control
Specifications subject to change without notice
Printed in U.S.A.
compliant POE switches. Interconnect shall be via female RJ-45
connector mounted to the PCB. All control functionality of the PCB
amplifier shall be determined via software. The metal loudspeaker baffle
overall dimensions shall be 11.5" (292mm) wide by 11.5" (292mm)
tall. Baffle construction shall be of 18 gauge cold rolled steel. Finish
shall be Atlas Sound neutral white electrostatic powder coat. Optional
enclosures shall include models SEA-I8S surface mount angled
enclosure for I8S - neutral white finish, SEST-I8S surface mount straight
enclosure for I8S - neutral white finish and FEST-I8S flush mount
straight enclosure for I8S - reclaimed powder coat finish.
Omni directional subminiature electret Condenser
1/4" (6mm)
9W RMS into 8Ω load with 9VDC in
RJ-45 female on PCB accessable from rear of baffl e
2 wire main ± terminated to loudspeaker
Cisco IEEE 802.3AF compliant POE network switches
local 12-18VDC PSU
4.25" (108mm) by 7.25" (184mm)
4 holes to weld studs on baffl e (factory assembled)
Berbee Informacast on multicast enabled networks
AtlasSound.com
01106
ATS002380 RevB 11/06
18 gauge CRS
11.5" (292mm) Square
4.21" (107mm)
4.07" (103mm)
White
SL1-2086