Atlas STRATEGY SERIES II FAP42TC Allgemeine Beschreibung

Blättern Sie online oder laden Sie pdf Allgemeine Beschreibung für Lautsprechersystem Atlas STRATEGY SERIES II FAP42TC herunter. Atlas STRATEGY SERIES II FAP42TC 3 Seiten. 4" speaker systems

Seite drucken

STRATEGY SERIES ® II 4" SPEAKER SYSTEMS

FAP42TC

Shown without grille

(included)

C-Ring/V-Rail

Mounting System

(optional)

FAP42-TR

POWER

70.7V

FREQUENCY

MODEL

RATING

TAPS

RESPONSE (±7dB)

25 Watts

1, 2, 4,

75Hz - 20kHz

(Transformer)

FAP42TC

8, 16

Limited

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 / FAX (800) 765-3435

FEATURES

• Low depth (4") speaker system for limited space applications

• Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg"

mounting system (Included)

• Front mounted tap selector switch for easy system tuning adjustments includes transformer

bypass setting for 8 ohm direct coupled operation

• "Press fit" grilles blend better into contemporary architecture

• Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintan low

frequency response while providing increased output for higher SPL applications

• UL Listing Pending

APPLICATIONS

FAP42TC combines superior coaxial loudspeaker performance with wide dispersion and easy

installation. A low profile enclosure and wide coverage make the FAP42TC a perfect choice for low

ceilings. The FAP42TC will satisfy the needs of owners, architects, contractors, and consultants

by delivering true, high fidelity sound reproduction in an attractive and easy-to-install system.

The FAP42TC is ideal for high-intelligibility voice, music, and signal reproduction in commercial,

industrial, and institutional applications.

GENERAL DESCRIPTION

The FAP42TC's 130 degree dispersion angle effectively reduces the number of loudspeakers

necessary to achieve coverage in distributed systems with low ceilings.

The loudspeaker component matches the performance of the legendary Atlas Sound Strategy FA

Series. High quality construction 1" voice coil 4" coaxial cone type driver includes polypropylene

cone with a butyl rubber surround. The 19mm coaxially mounted tweeter is constructed of PEI.

This loudspeaker is factory assembled to an optimally tuned & ported deep drawn enclosure and

includes a specially designed 16 watt low saturation 70.7V/100V transformer. A convenient front

mounted selector switch allows tap selection without the need to remove the speaker from the

ceiling. This switch also includes a transformer bypass setting for 8 ohm operation.

MOUNTING ACCESSORIES

Mounting is simplified with Strategy style "dog leg" tabs that allow easy installation into drop tile

or drywall ceilings with provided tile bridge assembly. The tile bridge consists of (2) "V" shaped

formed mounting rails and a C-ring assembly. The C-ring can be attached to the rails with the

screws provided to extend support to the T-bar grid in suspended ceiling applications. Multiple

hole locations are provided to allow the C-ring to be positioned to the outer edge the tile if

necessary.

For existing dry-wall applications the tile bridge c-ring and support rails can be inserted into

the hole cut for the FAP42TC. For easy positioning the "V" shaped support rails match the

shape of the C-ring tabs for easy maneuvering and location when working "blindly" above the

deck. A uniquely designed "easy access" input panel on the side of the enclosure allows for

conduit runs using flexible conduit. Wiring Terminals are concealed below this cover for easy

daisy chain wiring to other full range loudspeakers or Atlas Sound FASUB70 subwoofers. The

package includes an attractive press-fit grill which nicely matches contemporary architecture.

For new construction drywall ceiling applications, the optional FAP42-TR trim ring is available.

This unit provides a marked location for drywall installers to cut around essentially reserving the

desired location in the ceiling until final installation of FAP42TC. Mounting holes are provided to

accommodate 16" or 24" OC stud/joist mounting.

A support ring is also provided on the top of the FAP42TC enclosure to facilitate an auxiliary

support cable. NOTE: IT IS MANDATORY THAT THIS SECONDARY SUPPORT BE UTILIZED

IN DROP CEILINGS FOR SAFETY AND SEISMIC CONSIDERATIONS).

PEFORMANCE SPECIFICATIONS

SENSITIVITY

WOOFER

(1W/1M)

MAG WT .

88dB

4" Poly Cone

10 oz

Average

Butyl Rubber

(364g)

Specifications subject to change without notice

Printed in U.S.A.

DIMENSIONS

DRIVER

Coaxially Mounted 10.5" (267mm) Dia

PEI Dome

4.24" (108mm) H

AtlasSound.com

001004

ATS001871 RevB 10/04

FAP42TC

ENCLOSURE

CUT-OUT

WEIGHT-LESS

VOLUME

DIMENSION

TILE BRIDGE

134 Cubic

5.4 lbs.

Inches

(229mm)

(2.45kg)

SL1-2049

2.65