Atlas Diane Anleitung Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Fan Atlas Diane herunter. Atlas Diane 9 Seiten. Ceiling mounted oscillating directional fan ac 120v. 60hz

Seite drucken

2. Motor to Receiver Electrical Connections:

A. Connect the WHITE wire from the fan to the

WHITE wire marked "TO MOTOR

Receiver.

B. Connect the BLACK wire from the fan to the

BLACK wire marked "TO MOTOR

Receiver.

Connect the BLUE wire from the fan to the

BLUE wire marked "oscillation" from the Receiver.

Proceed to secure all wire connections

plastic wire nuts provided. (Fig. 12)

Note: Fan must be installed from a maximum

distance of 40 feet from the transmitting

proper signal transmission between the transmitting

unit and the fan's receiving unit.

3. Receiver

to House

Connections:

A. Connect the WHITE wire (Neutral) from the

outlet box to the WHITE wire marked "AC in N"

from the receiver.

B. Connect the BLACK wire (Hot) from the outlet

box to the BLACK wire marked "AC in L" from the

receiver.

Secure

all wire connections

plastic wire nuts provided. (Fig. 12)

4. If your outlet box has a GROUND wire (Green or

Bare Copper) connect this wire to the Hanger Ball

and Hanger Bracket Ground wires. If your outlet

box does not have a Ground Wire, then connect

the Hanger Ball and Hanger Bracket Ground Wires

together. Secure wire connection with the plastic

wire nut provided. (Fig. 12)

5. Tuck connections neatly into ceiling outlet box.

6. Slide the canopy up to hanger bracket and place

the key hole on the canopy over the screw on the

hanger bracket, turn canopy until it locks in place at

the narrow section of the key holes. (Fig. 13)

7. Align the circular

hole on canopy with the

remaining hole on the hanger bracket, secure by

tightening

the two set screws. Note: Adjust the

canopy screws as necessary until the canopy and

canopy cover are snug.

Warning:

Make sure tab at bottom of hanger

bracket is properly seated in groove of hanger ball

before attaching

canopy

properly seat tab in groove could cause damage to

electrical wiring.

N" from the

L" from the

with the

unit for

Supply

Wires

Electrical

with the

to bracket.

Failure to

OUTLET BOX

BLACK (HOT)

J.~_~

RECEIVER

BLUE (OSCILLATION)

BLACK (MOTOR)

Figure 12

OUtietbox_[

Hanger

bracket

.11

4b~canopy

Figure 13

WHITE (NEUTRAL)

GREEN OR BARE

COPPER (GROUND)

WHITE ("AC IN N")

Vln-iITE ("TO MOTOR N")

+-GROUND-{3 GROUND WIRES

(GREEN) ON CEILING FAN)

WHITE (NEUTRAL)

Screws

cover