Alert J5 Gebrauchsanweisung - Seite 8

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Prüfgeräte Alert J5 herunter. Alert J5 20 Seiten.

Buttons and Menus

The ALERT J5 has an interface similar to a cellular

phone, which allows you to navigate all menus using the

two buttons.

Either button powers on the device. To navigate using the

two buttons:

• Use the right button to scroll down to your selection

(scrolling up is not possible)

• Use the left button to select (Enter) the option

The device has the following menus:

• Last 100 tests: Recalls and displays the last 100 test

results. You have the option of printing using the right

button. Refer to the "Printing" section for details

• Calibration: Shows the date of last calibration. You

can re-calibrate using the right button. Specialized

equipment is required to accurately calibrate ALERT

J5 and you should not attempt to calibrate it yourself

• Deactivation/Activation: A service menu option for

use by manufacturer or distributer. Units are supplied

to customer in "Activated" state

• Date/Time: Shows the current date and time of the

device. Use the right button to scroll through the digits

and the left button to change the values. You can also

set the time to a 12 or 24 hour format

• Settings:

- Change the units of the BrAC/BAC. Using the

right button, scroll to the desired unit and press

left button to select. The units available are: mg%,

%BAC, g/L, mg/L, and μg/100mL

- Backlight: Set the brightness of the backlight and

the time you would like the light to stay on

p. 2/13

ALERT