Advanced PureAir Newport ULTRA Gebrauchsanweisung Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung Handbuch für Luftreiniger Advanced PureAir Newport ULTRA herunter. Advanced PureAir Newport ULTRA 19 Seiten.
Seite drucken
Operation
Locate the unit on a solid surface. Be sure the air inlet/outlet is not blocked by other objects. (At
least 30cm clearance on the sides)
It is best to locate the unit where it will be out of any children's play area.
Before plugging in the unit, please open the windows in the area where you will be using the unit.
Ventilate the area for 2-3 hours if possible. Once the area has been ventilated, close the windows
and plug in the unit.(Figure 1)
Switch on the unit and start to operate under AUTO mode.
Once started, the color of CLEAN SIGN will change alternately for 1 minute (as it memorizes the
existing fresh air condition), and then CLEAN SIGN will indicate current air quality. (Figure 2)
After plugging in, the unit sensor will sample the air and retain a memory of the existing indoor air
condition. (The existing indoor air condition will be input as "Clean Air").
Note: Whenever the unit is unplugged, all memorized content will be erased.
F1
For initial use or re-operate the unit after unplug, the sensor need to be pre-heated for 3-5
minutes and will not response during this period.
Besides, if the current air quality is not good (such as smoke, cosmetics or alcohol is
presented), please ventilate and freshen the air before closing windows.
Re-operate the unit after long period unused, the sensitivity of the sensor may decrease, it will
revert to normal after 1-2 days operation.
PREPARATIONS BEFORE USE
F2
CLEAN SIGN
Caution
5