Alert 450R Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Fernsteuerung Alert 450R herunter. Alert 450R 14 Seiten. Remote starter system

OPERATION
3. To stop the “Panic Mode”, press and hold the
transmitter for 3 seconds. Also if any transmitter buttons other than
or
button is pressed and released, the panic mode will be turned off
immediately.
4. If the button is not pressed, the “Panic Mode” will automatically stop
after 30 seconds.
K. DOME LIGHT SUPERVISION
The system has a unique feature which will turn on your vehicle’s dome
light as follows:
1. After disarming, the dome lights will remain on for 30 seconds (if
connected).
2. If the vehicle is intruded, the dome light will flash for the same duration
as the siren.
Note: Turning on the ignition switch or arming the alarm will turn
off the dome light.
L. IGNITION CONTROLLED DOOR LOCKS.
If the vehicles door locks have been interfaced with the unit’s keyless entry,
the system will automatically lock the vehicle's doors when the ignition is
turned “ON” and will unlock the vehicle’s doors when the ignition is turned
“OFF”.
M. CHANNEL 3 (TRUNK RELEASE) OUTPUT
Press and hold the
trunk release or other electric devices that have been added to this output.
N. CHANNEL 4 OUTPUT (See Alarm Feature 1 – 4/5 Programming)
Press the
and the
electrical device. The connected device will turn on, when the button(s) are
press continuously, and turn off, when the button(s) are released.
O. CAR FINDER
Press the
button twice to active the “Car Finder function”. The siren
will chirp 6 times. The parking light will flash 12 times, this feature will
help you find your vehicle in a crowded parking lot.
button on transmitter for two seconds to control the
buttons at the same time to control the optional
or
buttons on the
.
7