Bose Companion 2 Series II Kurzanleitung zur Einrichtung und Sicherheitshinweise - Seite 5
Blättern Sie online oder laden Sie pdf Kurzanleitung zur Einrichtung und Sicherheitshinweise für Redner Bose Companion 2 Series II herunter. Bose Companion 2 Series II 6 Seiten. Series ii
Auch für Bose Companion 2 Series II: Benutzerhandbuch (14 seiten), Benutzerhandbuch (36 seiten), Benutzerhandbuch (40 seiten), Benutzerhandbuch (18 seiten)
Seite drucken
1.
Read these instructions – for all
components before using this product.
2.
Keep these instructions – for future
reference.
3.
Heed all warnings – on the product and in
the owner's guide.
Follow all instructions.
4.
Do not use this apparatus near water or
5.
moisture – Do not use this product near a
bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, near a swimming
pool, or anywhere else that water or
moisture are present.
6.
Clean only with a dry cloth – and as
directed by Bose Corporation. Unplug this
product from the wall outlet before cleaning.
Do not block any ventilation openings.
7.
Install in accordance with the
manufacturer's instructions – To ensure
reliable operation of the product and to
protect it from overheating, put the product
in a position and location that will not
interfere with its proper ventilation. For
example, do not place the product on a bed,
sofa, or similar surface that may block the
ventilation openings. Do not put it in a built-
in system, such as a bookcase or a cabinet
that may keep air from flowing through its
ventilation openings.
Do not install near any heat sources,
8.
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the
9.
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding-type plug
has two blades and a third grounding prong.
The wider blade or third prong are provided
for your safety. If the provided plug does not
fit in your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being
10.
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories
11.
specified by the manufacturer.
Unplug this apparatus during lightning
12.
storms or when unused for long periods
of time – to prevent damage to this product.
Refer all servicing to qualified service
13.
personnel. Servicing is required when the
apparatus has been damaged in any way:
such as power supply cord or plug is
damaged; liquid has been spilled or
objects have fallen into the apparatus;
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped – Do not attempt to
service this product yourself. Opening or
removing covers may expose you to
dangerous voltages or other hazards.
Please call Bose to be referred to an
authorized service center near you.
To prevent risk of fire or electric shock,
14.
avoid overloading wall outlets, extension
cords, or integral convenience receptacles.
Do not let objects or liquids enter the
15.
product – as they may touch dangerous
voltage points or short-out parts that could
result in a fire or electric shock.
See product enclosure for safety-related
16.
markings.
Use proper power sources – Plug the
17.
product into a proper power source, as
described in the operating instructions or
as marked on the product.
Information about products that generate
electrical noise
If applicable, this equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, this is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, you are encouraged
to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment to an outlet on a
different circuit than the one to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This product complies with the Canadian
ICES-003 Class B specifications
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.