Bose F1 Model 812 Passive Benutzerhandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner Bose F1 Model 812 Passive herunter. Bose F1 Model 812 Passive 24 Seiten. Flexible array loudspeaker system
Auch für Bose F1 Model 812 Passive: Installations- und Sicherheitshandbuch (20 seiten)
Seite drucken
Operation
F1 Model 812 Control Panel
Note: For a complete list of LED indications and behaviors, see "LED Indicators" on page 20.
SIGNAL/CLIP: Displays the input signal status
in color.
• Green = signal present.
• Red = signal clipping, input signal too high
VOLUME: Adjusts channel volume.
SIGNAL INPUT: Selector switch sets input
sensitivity for input type. Combo connector
accepts XLR mic connector or ¼" phone
plug (TRS balanced or TS unbalanced
cables).
• MIC selects sensitivity for microphone
inputs (dynamic or self-powered mics
only) – use only when a mic is connected
directly to the input.
• LINE selects sensitivity for line-level in-
puts, for example, from a mixing console
or DJ controller.
10 - English
POWER: AC
power on/off
POWER/FAULT:
• Blue = power on.
• Red = fault condition.
LIMIT:
• Amber = system limiting (protection mode).
FRONT LED:
• POWER enables front LED to indicate power status.
• LIMIT engages a limiting display on the front LED.
• OFF turns off the front LED.
EQ: (See "Power On/Off Sequence" on page 12.)
• FULL RANGE allows the loudspeaker to function without high-pass filtering.
• WITH SUB engages a high-pass filter (100 Hz) when using the loudspeaker with the F1
subwoofer. Recommended when using with F1 Subwoofer.
LINE OUTPUT:
• Balanced XLR line output provides a mix of input 1 and 2, post input volume control. Can
be used to daisy chain speakers together.
AC power
input
SIGNAL/CLIP: Displays the input signal
status in color.
• Green = signal present.
• Red = signal clipping, input signal too high.
VOLUME: Adjusts channel volume.
RCA connectors: Analog stereo input for
audio sources such as DJ controllers and
other line-level sources. Left and right are
summed, producing a mono audio output
and mono signal to LINE OUTPUT (XLR).
• Left (White)
• Right (Red)
¼" phone connector: Provides analog
input for guitars and other instruments.
Accepts TRS balanced or TS unbalanced
cables.