Bose FreeSpace 32 Handbuch für Installateure - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch für Installateure für Redner Bose FreeSpace 32 herunter. Bose FreeSpace 32 17 Seiten.
Auch für Bose FreeSpace 32: Handbuch für Installateure (23 seiten)

Seite drucken

Please read this safety information before installing, connecting, or operating the Bose

FreeSpace

system controller (Model 8/32).

1.1 Read the instructions – Read and keep all safety and operating instructions.

1.2 Follow cautions – For safety, follow all cautions and warnings in this guide and on

the system controller.

1.3 Avoid moisture – Do not install the controller near water or excessive humidity. Do

not install near swimming pools, spas, dish washing or laundry equipment, or in

other excessively humid environments.

1.4 Avoid heat – Do not install the controller near excessive heat sources, such as

radiators, ranges, grills, fryers, stoves, or other appliances.

1.5 Protect cables – Put cables where they won't be pinched or cut by heavy or sharp

objects.

1.6 Connect the power cord properly – Make sure the controller is properly grounded.

If the power cord includes a ground pin, it should be connected to the ground on the

power outlet.

1.7 Disconnect for service – To reduce the risk of electric shock, disconnect the power

cord before replacing the fuse or when changing the voltage selection. The power

cord must remain disconnected until the fuse holder/voltage selector assembly is

replaced.

1.8 Ventilate equipment racks – If mounting the controller in a rack with heat-produc-

ing electronic equipment, vent the rear of the rack to prevent overheating the

controller.

1.9 If damage occurs – Obtain service from qualified service personnel under the

following conditions:

A. Water or other liquid spills into the controller;

B. If the controller is exposed to rain or water;

C. If the controller does not operate normally, even though you have followed the

instructions in this guide;

D. If the controller exhibits a distinct change in performance.

1.10 Safety check – After service or repairs, ask the service technician to perform safety

checks. This includes properly connecting the safety ground wire to the power

mains connector.

AM177675-2_04_V.pdf • May 7, 2002

1.0 Safety Information