Atlas Copco 2000-2/SMF2 Reparaturanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Reparaturanleitung für Bohrer Atlas Copco 2000-2/SMF2 herunter. Atlas Copco 2000-2/SMF2 8 Seiten.
Seite drucken
Special Tools
Mandril (diameter 9.5 mm), approx. 100 mm long.
Required
Assembly support in which the tool can be fixed vertically.
Important!
Before beginning the maintenance work, perform an initial check with a high voltage test according
to VDE (see chapter Electrical and Mechanical Test Instructions).
Before all repair work, pull the power plug from the socket!
Disassembly
1
Dismantling the
Lever off the spring washer (4) with aid of
chuck
a screwdriver.
2
Remove the pin (3) and the roller (1).
3
Pull off the multi-function chuck (2).
4
Only applicable for PN 2000 spec. N:
Remove the hammer chuck.
1
Dismantling the
Insert the machine into the assembly
gear box
support and remove the four screws (6).
2
Lever off the switch levers (2) and (4) with
aid of a screwdriver.
3
Remove the gear box (5).
4
Remove the pin (8), the gear switch
lever (7), and the O-ring (3) together with the
discs.
5
Remove the gear wheel (1).
6
Remove the spindle sleeve (9).
Repair Instructions No.176.11/95
PN 2000-2/ MF/ MF2/ N/ SMF2/ spec.N
4
3
1
4
2
3
9
8
7
PAGE
1
1
2 1
5
2
6