Bose PANARAY 620M Service-Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Service-Handbuch für Redner Bose PANARAY 620M herunter. Bose PANARAY 620M 21 Seiten. Multi-position floor array
Auch für Bose PANARAY 620M: Installationshandbuch (4 seiten)

Seite drucken

DISASSEMBLY PROCEDURES

Panaray

Model 310M

Loudspeaker

Refer to the figure at right for

the following procedures.

1. Grille Removal

1.1 Remove the four screws

(1) using a Phillips-head

screwdriver.

1.2 Lift off the grille (2).

2. Handle Removal

2.1 Perform procedure 1.

2.2 Remove the two screws

(12). Lift off the handle (13).

3. Woofer Removal

3.1 Perform procedure 1.

3.2 Remove the four screws (4).

3.3 Lift out the woofer (5) and disconnect the

wires from the terminals.

Re-assembly Notes: Be sure to observe

polarity when connecting the new woofer to

the wiring harness.

4. Tweeter Driver Removal

4.1 Perform procedure 1.

4.2 Remove the four screws (7).

4.3 Lift out the driver (9) and disconnect the

wires from the terminals.

Re-assembly Notes: Be sure to observe

polarity when connecting the new driver to

the wiring harness.

5. Neutrik

Speakon

5.1 Remove the two screws (20) for the jack

you wish to remove.

5.2 Lift off the input jack (19). Cut the wires

as close to the jack as possible. Refer to the

wiring diagram in the back of this manual

when installing the new jack.

6. Crossover Assembly Removal

6.1 Perform procedure 3.

6.2 Disconnect the crossover harnesses

from the woofer, tweeters and input jacks.

6.3 Remove the four nuts that secure

the crossover assembly (15) to the input

panel (18). Lift out the crossover assembly.

Jack Removal