Bose Panaray 802 Series IV Installationshandbuch - Seite 17

Blättern Sie online oder laden Sie pdf Installationshandbuch für Redner Bose Panaray 802 Series IV herunter. Bose Panaray 802 Series IV 24 Seiten. Full-range-driver array loudspeakers
Auch für Bose Panaray 802 Series IV: Installationshandbuch (2 seiten), Installationshandbuch (32 seiten)

Bose Panaray 802 Series IV Installationshandbuch
pro.Bose.com
Mount the loudspeaker on the wall plate. Slide the fin of the speaker bracket into the wall bracket and install the
5.
M8 x 25 mm pivot screw, and then the M6 x 25 mm pitch locking screw.
Set the pitch and yaw of the loudspeaker.
6.
To set the pitch: Loosen the M8 x 25 mm screw, remove the M6 x 25 mm screw, change the angle and re-insert the
screw. Tighten both screws.
To set the yaw: loosen both screws screw, change the angle and tighten both screws.
Using an M8 x 16 mm screw, attach the safety cable to the speaker. Make sure the safety cable is attached to the wall
7.
independent of the wall plate.
CSB-5A suspension bracket kit (for indoor use only)
M8 x 1.25 x 12 mm (3)
(3)
M8 X 25 mm
M6 X 25 mm
0° to –45°
M6 X 25 mm
±60°
M8 X 25 mm
Installation
17