Atlas Copco PHE 26 RA Reparaturanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Reparaturanleitung für Bohrer Atlas Copco PHE 26 RA herunter. Atlas Copco PHE 26 RA 12 Seiten.

Removing the

1 Remove the two screws (1).

spindle

2 Remove the straight pin (5).

3 Remove the planetary gear (6) and the

ring gear (7).

4 Remove the complete spindle sleeve (2)

from the cylinder.

Removing the

1 Place the spindle vertically and briefly hit

striker

the plunger (1) with a mandril - the

striker (2) comes free.

Dismantling the

1 Removing the rear thrust bearing (7):

spindle

Lever off the special locking ring (8) with a

(removing the

screwdriver and remove it (peel it off like a

inner locking

key ring). The thrust bearing can be

ring)

removed in the following component

parts:

– washer

– thrust bearing

– two compensating washers

– profile ring with damper-O-ring

2 Remove the retaining clip (6) and the

locking slide (5).

3 Removing the spindle wheel (3):

Press the spindle wheel with a sleeve

against the disk springs (1) – the locking

ring (4) is released and can be removed

with pliers. Remove the spindle wheel.

4 Remove the ratchet (2) and the disk

springs (1).

Repair Instruction No. 174.3/95

PHE 26 RA

3 4

PAGE