Atlas Copco PHE 6 H Reparaturanleitung - Seite 9
Blättern Sie online oder laden Sie pdf Reparaturanleitung für Bohrer Atlas Copco PHE 6 H herunter. Atlas Copco PHE 6 H 18 Seiten.
1
Detaching the
Pull the piston (3) from the gear hous-
piston and the
ing (7).
connecting rod
2
Pull the striker (1) from the piston (3) and
remove the O-ring (2) from the striker (1).
3
Press the cylindrical bolt (4) from the pis-
ton (3) and pull out the connecting rod (5).
4
Press out the needle bearing (6) from the
connecting rod (5).
Maintenance
General
It is recommended to submit the machine to maintenance after the carbon brushes have switched off.
Cleaning
Clean all parts – with the exception of the electrical parts – with cold cleaning agent. Caution! No clean-
ing agent should penetrate into the bearing. Clean the electrical parts with a dry brush.
Check for wear
Check the disassembled parts for wear (visual inspection) and replace worn parts.
Electrical tests
Before reassembling, perform an electrical test on all relevant parts (see chapter Electrical and Me-
chanical Test Instructions).
Repair Instructions No.181.03/98
1
2
PHE 6 H / PHE 6 S
5
6
4
3
PAGE
8
17
7