Atlas Copco Secoroc YT29A Betriebsanleitung - Seite 13
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Bohrer Atlas Copco Secoroc YT29A herunter. Atlas Copco Secoroc YT29A 20 Seiten. Pusher leg rock drill
Seite drucken
Once a week (after 40 hours of operation)
Carry out a basic check of all functions of the drilling equipment.
Once a month (after 200 hours of operation)
h
Send the rock drill to a workshop for inspection. The local operating conditions
will determine whether or not this is a suitable interval for overhauling the drill.
h
Dismantle and clean the lubricator.
h
Clean out the water separator.
Measures to prevent freezing
In low ambient temperatures, ice can form in the machine. This can be avoided if
the water in the compressed air is removed. This can be done by equipping the air
lines with water separators and drainage points for water condensate.
If the rock drill ices up, it must not be heated to melt the ice. Let the ice thaw at
room temperature.
Note! Do not pour methylated spirits or similar substances into the rock drill, as
they will interfere with the lubrication and lead to increased wear.
Scrapping and waste disposal
Used and worn-out machines must be disposed of in such a way that as much of
the material as possible can be recycled and the impact on the environment is kept
to a minimum.
13
13