Atlas Copco G2417 S120 Anweisungen zum Produkt - Seite 3

Blättern Sie online oder laden Sie pdf Anweisungen zum Produkt für Schleifer Atlas Copco G2417 S120 herunter. Atlas Copco G2417 S120 12 Seiten.

Seite drucken

G2417 S120

General information

Design and function

This die grinder is intended for mounted wheels and

rotary burrs only. This model is lubricated. The ma-

chine, its attachments and accessories must only be

used for the purpose for which they were designated,

all other use is prohibited.

• Never use grinding wheels attached with an ad-

apter as this machine is not fitted with a wheel

guard

• Never attach circular saw blades or other cutters

than the abrasive wheels or brushes specified for

the tool

Signs and stickers

The product is fitted with signs and stickers contain-

ing important information about personal safety and

product maintenance. The signs and stickers shall

always be easy to read. New signs and stickers can

be ordered by using the spare parts list.

WARNING

Installation

• Fit the support handle in suitable position for

right- or left hand operation respectively.

• Always make sure that you have the correct guard

for the grinding equipment.

• Attach the grinding equipment.

Adjust the guard for best operator protection.

• Connect the machine to the air line.

Blow out the hose before connecting.

The motor requires no additional lubrication dur-

ing operation.

• The throttle valve lever may only be activated

after pushing the lever catch release arm forwards.

Check regularly that the catch and the release

arm moves easily.

Installation of vibrating tools

It is recommended that a minimum length of 300

mm of flexible hose for compressed air is inserted

between a vibrating tool and the quick-action coup-

ling.

Air quality

• For optimum performance and maximum product

life we recommend the use of compressed air with

a dew point between +2°C and +10°C. Installation

Safety and operating instructions

of an Atlas Copco refrigeration-type air dryer is

recommended.

• Use a separate air filter of type Atlas Copco FIL,

removes solid particles larger than 15 microns and

more than 90 % of liquid water, installed as close

as possible to the product and prior to any other

air preparation unit like REG or DIM (please see

Air Line Accessories in our main catalogue). Blow

out the hose before connecting.

Lubricated models:

• The compressed air must contain a small quantity

of oil. We strongly recommend that you install an

Atlas Copco oil-fog lubricator DIM, to be set

normally at 3–4 drops (50 mm

running tools, or an Atlas Copco single-point

lubricator type Dosol for short cycle running tools.

For Dosol setting please see Air Line Accessories

in our main catalogue.

Compressed air connection

WARNING Air under pressure can cause

serious injury

Always shut off air supply, drain hose of air

►

pressure and disconnect tool from air supply when

not in use, before making any adjustments to the

product, e.g. changing accessories, or when mak-

ing repairs.

Never direct air at yourself or anyone else.

►

WARNING Whipping hoses can cause seri-

ous injury

Always check for damaged or loose hoses and

►

fittings.

Check air pressure:

• The product is designed for a working pressure

(e) of 6-6,3 bar = 600-630 kPa = 87-90 psig.

• The air pressure at the tool inlet with the product

running must not exceed the maximum operating

pressure 6,3 bar = 630 kPa = 90 psig.

• Blow out the hose before connecting it.

Atlas Copco G2417 S120 Anweisungen zum Produkt - Seite 3

Installation

Operation