Bose Acoustimass 5 Series IV Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem Bose Acoustimass 5 Series IV herunter. Bose Acoustimass 5 Series IV 22 Seiten. Bose owner's guide powered speaker system acoustimass 5 and 20

Bose Acoustimass 5 Series IV Benutzerhandbuch
Figure 14 a

Setting Zone 2 Protocol

AM262838_00_V.pdf
Setting Zone 2 Protocol
®
For the Acoustimass
5 or 20 powered speaker system to work properly with a Lifestyle
you will need to check the Zone 2 Protocol to ensure that it is set to Normal mode (Figure 14 a).
1. While your Lifestyle
®
system is on, press the Settings button on your remote control. This will open
the on-screen display.
2. Scroll down with the down-arrow button and select System Setup using the Enter button.
3. You will now see a menu entitled System Setup (1 of 3). Scroll down to "more...".
Continue to scroll down through (2 of 3) to (3 of 3). The last item on System Setup (3 of 3) is Zone 2
Protocol.
4. If necessary, use the right-arrow button to set the protocol from Legacy to Normal.
5. If you changed the Zone 2 Protocol, shut off the system and turn it on again; this ensures that the
Zone 2 Protocol is reset to Normal mode.
On
Mute
Mute
Off
All
SOURCE / INPUT
CD/DVD
Changer
FM/AM
TV
VCR
AUX
Settings
MENU / NAVIGATION
Settings
Tune
Disc
Seek
Enter
Channel
Chapter
Volume
Preset
Track
1
2
3
4
5
6
7
8
9
0
PLAYBACK
Stop
Pause
Play
Shuffle
Repeat
Connecting power to your system
CAUTION : If you purchased a dual-voltage system, it is important that you set the speakers to the
correct voltage. To do this, refer to "Selecting the correct voltage" on page 6.
Follow these steps to connect power to your Acoustimass powered speaker system:
1. Plug the power cord from the Acoustimass module into an AC power (mains) outlet.
2. Insert the power cords of the Lifestyle
3. Turn the Acoustimass module power switch to the On position.
Settings ( )
System Setup
Enter
®
system into an AC power (mains) outlet.
December 20, 2001
Setting Up
®
media center,
System Setup (3 of 3)
Zone 2 Protocol:
Normal
13