Atlas Copco 8431026931 Anweisungen zum Produkt - Seite 13
Blättern Sie online oder laden Sie pdf Anweisungen zum Produkt für Kraftschraubendreher Atlas Copco 8431026931 herunter. Atlas Copco 8431026931 20 Seiten.
Seite drucken
LUM12 HRF
EN
Service
For Maximum Performance
At tough working conditions – soft joints and max. setting – lubrication of the air is recommended.
With extreme dry air the service life of vanes and machine performance might be reduced. A daily supply
of 0.1 – 0.2 ml oil into the machine inlet will improve the machine performance. Alternatively consider an
automatic lubricator device, Atlas Copco oil fog lubricator DIM, or single point lubricator DOS, which will
improve the machine performance.
Dismantling/Assembling Instructions
Dismantling of Motor
Disassembling/Assembling
It is important that the machines threaded connections are tightened properly; i.e. in accordance with the
specifications on the exploded views.
Tightening of Threaded Connections
The tightening torque indicated in the exploded views (see Spare parts section in
https://
servaid.atlascopco.com) will give the right clamping force and prevent parts from loosening. It is important
not to exceed the clamping force, these parts must be able to open up without being damaged at service.
After some time of operation and in special circumstances, depending on application and usage, the parts
may however loosen somewhat. The tightening torque can then be increased by 10-20% and some type
of low or medium thread locking fluid can be applied.
© Atlas Copco Industrial Technique AB - 9836 9378 01
13