Bose Companion 5 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem Bose Companion 5 herunter. Bose Companion 5 29 Seiten. Bose owner's guide music system lifestyle 5
Auch für Bose Companion 5: Benutzerhandbuch (21 seiten)

Seite drucken

Setting Up

Connect the speakers and Lifestyle

Figure 4

Speaker cable connections to

the cube speaker array

Once you have selected locations for your music system, connect the speakers.

CAUTION: Make sure all components are unplugged from the power outlet before you

begin hooking up the system.

Connecting the cube speaker arrays to the Acoustimass

module

Each speaker cable contains two wires. The wire marked with a red collar is positive (+) and

the plain one is negative (–). These wires match the positive (red) and negative (black) termi-

nals on the back of each speaker. To lengthen the cable, use standard RCA extension cables

or splice in 18-gauge or thicker cord (connecting + to + and – to –). To purchase cables, see

your dealer, electronics store, or call Bose

1. Match the correct cable to the corresponding speaker location.

• Speaker cables have blue connectors at one end, with L and R molded into the

connectors.

• The red collars on the + wire are labeled LEFT and RIGHT.

2. Connect the wire end of one speaker cable to the terminals on the rear of the matching

cube speaker array.

a. Press the terminal tab on the back of the cube array to insert the marked wire into the

red terminal and the plain wire into the black terminal. Release the tab to secure the

wire.

b. Repeat this step for each of the cube speaker arrays. (See Figure 4.)

CAUTION: Make sure no strands of wire from any terminal touch any other terminal.

Bridged wires create short circuits that affect proper operation of your system.

3. Connect each cable to the corresponding left or right blue jack on the Acoustimass

module.

October 22, 2001

music center

customer service.

AM251174_03_V.pdf