Atlas Copco LUM12 HRX Anweisungen zum Produkt - Seite 13
Blättern Sie online oder laden Sie pdf Anweisungen zum Produkt für Kraftschraubendreher Atlas Copco LUM12 HRX herunter. Atlas Copco LUM12 HRX 20 Seiten.
Seite drucken
LUM12 HRX/HRX-RE
EN
Service
For Maximum Performance
At tough working conditions – soft joints and max. setting – lubrication of the air is recommended.
With extreme dry air the service life of vanes and machine performance might be reduced. A daily supply
of 0.1 – 0.2 ml oil into the machine inlet will improve the machine performance. Alternatively consider an
automatic lubricator device, Atlas Copco oil fog lubricator DIM, or single point lubricator DOS, which will
improve the machine performance.
Dismantling/Assembling Instructions
Disassembling/Assembling
It is important that the machines threaded connections are tightened properly; i.e. in accordance with the
specifications on the exploded views.
Dismantling of Motor
Tightening of Threaded Connections
The tightening torque indicated in the exploded views (see Spare parts section in
https://
servaid.atlascopco.com) will give the right clamping force and prevent parts from loosening. It is important
not to exceed the clamping force, these parts must be able to open up without being damaged at service.
After some time of operation and in special circumstances, depending on application and usage, the parts
may however loosen somewhat. The tightening torque can then be increased by 10-20% and some type
of low or medium thread locking fluid can be applied.
© Atlas Copco Industrial Technique AB - 9836 9388 01
13