Atlas Copco P2000i Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch für Tragbarer Generator Atlas Copco P2000i herunter. Atlas Copco P2000i 2 Seiten.
Seite drucken
PRE-OPERATION CHECK
1.
Check the engine oil level (4-stroke motor oil).
•
Ensure the machine is off and on a level surface.
•
Remove the screws (1) and the oil filler cap (3).
•
Fill with the specified amount of SAE 10W-30 oil.
2.
Check the fuel level.
•
Remove the fuel tank cap and fill to the red mark (1) to achieve
the correct fuel level (2).
STARTING THE ENGINE
1.
Before starting, ensure the ESC switch is OFF (1).
2.
Turn the air vent knob to on (2).
3.
Turn the three in one switch to "CHOCK" (3).
4.
Pull slowly on the recoil starter until it is engaged, then pull it briskly.
Hold the carrying handle with one hand to prevent the unit falling over.
5.
Warm up the engine until it does not stop if the chocke knob is
returned to the "ON" position (4).
PORTABLE GENERATOR
BASIC INSTRUCTIONS
(Atlas Copco P2000i)
STOPPING THE ENGINE
1.
Disconnect any electric devices and turn the ESC switch to off (1).
2.
Turn the 3 in 1 switch to OFF (2).
3.
Turn the fuel tank cap air vent knob to OFF (3) after the engine has
cooled down.
MAIN COMPONENTS