Bose SoundTouch Service-Handbuch - Seite 35

Blättern Sie online oder laden Sie pdf Service-Handbuch für Lautsprechersystem Bose SoundTouch herunter. Bose SoundTouch 39 Seiten. Wireless pedestal
Auch für Bose SoundTouch: Benutzerhandbuch (33 seiten), Benutzerhandbuch (32 seiten), Schnellstart-Handbuch (2 seiten), Handbuch (9 seiten), Benutzerhandbuch (20 seiten), Benutzerhandbuch (32 seiten), Schnellstart-Handbuch (5 seiten), Start Here Handbuch (20 seiten), Schnellstart-Handbuch (2 seiten), Benutzerhandbuch (18 seiten), Schnellstart-Handbuch (5 seiten), Schnellstart-Handbuch (2 seiten)

Seite drucken

SERIAL NUMBER AND COUNTRY CODE PROGRAMMING

Perform both of these procedures any time

the Wi-Fi Module is replaced.

Download two macros from the

SoundTouch

product's repair information

page located on http://serviceops.bose.com.

Place these macros in the Tera Term pro-

gram folder.

set_serial_number.ttl

set_country_code.ttl

1. Setting the Serial Number

1.1 Connect the SoundTouch wireless

pedestal to a computer as shown in the TAP

command setup procedure on pages 31 -

32.

1.2 Within Tera Term, select Control then

Macro and Select the file -

"set_serial_number.ttl"

1.3 Follow the prompts.

2. Setting the Country Code

2.1 Connect the SoundTouch wireless

pedestal to a computer as shown in the TAP

command set up procedure on pages 31 -

32.

2.2 Within Tera Term, select Control then

Macro and Select the file -

"set_country_code.ttl"

2.4 Follow the prompts.

Note: Selecting us sets the Wi-Fi module to

the US standard channels 1-11. Selecting eu

sets the Wi-Fi module to EU standard

channels 1-13

3. Reading the Country Code.

3.1 Type the command "local_services on"

and <enter>. Then press CTRL-C on the

keyboard. Then type "e" and <enter>. The

command line lisa login: should be displayed

on the computer.

3.2 Type the command "root" and <enter>.

The command line should be

root@lisa:root#.

3.3 Enter "cat /var/tmp/mfgdata.xml". The

country code is displayed in the first line of

the response.

3.4 Return to CLI prompt by entering the

command "rm /mnt/nv/local_services" and

<enter>.

3.5 Enter the command "exit" and <enter>.

This will return to the TAP interface (CLI) and

a TAP command line "->" should be shown.