Bose Sub1 Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Lautsprechersystem Bose Sub1 herunter. Bose Sub1 6 Seiten. Powered bass modules
Auch für Bose Sub1: Firmware-Aktualisierung (4 seiten), Firmware-Aktualisierung (44 seiten), Benutzerhandbuch (14 seiten), Handbuch (2 seiten)
Seite drucken
Technical Specifications
System Performance
Model Name
System Type
Frequency Response (–3 dB)
Frequency Range (–10 dB)
Nominal Vertical Coverage Pattern
Nominal Horizontal Coverage Pattern
Calculated Maximum SPL @ 1 m, continuous
Calculated Maximum SPL @ 1 m, peak
Crossover
Transducers
Low Frequency
Low Frequency Voice Coil Size
Driver Protection
Amplification
Type
Low Frequency Amplifier Channel
Cooling
Onboard Mixer
Channels
Channel 1 & 2 Input: Audio Type
Channel 1 & 2 Input: Impedance
Channel 1 & 2 Input: Channel Gain
Channel 1 & 2 Input: Max Input Signal
Channel 1 & 2 Output: Audio Type
SubMatch Input: Audio Type
SubMatch Thruput: Audio Type
LED Indicators
AC Power
AC Power Input
Input: Electrical Type
Initial turn on inrush current
Inrush current after AC mains interruption of
5 s
PRO.BOSE.COM/L1
Sub1
Self-powered bass module
1
40 Hz to 180 Hz
32 Hz to 250 Hz
0°
Omnidirectional (with –10 dB rear rejection in Cardioid mode)
2
118.6 dB
2
124.6 dB
200 Hz
1 × RaceTrack low-frequency driver 7" × 13"
2"
Dynamic limiting
Class D
480 W
Convection cooling
Two
Combination XLR or 1/4" TRS connector (mic/instrument/line)
100 KΩ
+10 dB to +45 dB; from input to driver, controlled by volume control
+24 dBu
XLR connector, line-level, full-frequency bandwidth
Bose proprietary multi-pin cable
Bose proprietary multi-pin cable
Standby, Phase/Pattern selection, Input EQ selection, Output EQ selection,
Signal/Clip Indicator
100–240 VAC (±20%, 50/60 Hz)
IEC, SubMatch
14.9 A at 120 V; 29.3 A at 230 V
5.8 A at 120 V; 32.0 A at 230 V
2
OF 6