Bose CINEMATE 1 SR Setup-Handbuch - Seite 18

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Home Theater System Bose CINEMATE 1 SR herunter. Bose CINEMATE 1 SR 20 Seiten. Home theater speaker system
Auch für Bose CINEMATE 1 SR: Betriebshandbuch (16 seiten), Betriebshandbuch (44 seiten), Setup-Handbuch (40 seiten)

Seite drucken

YSTEM

ETUP

A. Point the remote at the speaker array and press the system power button.

B. Check that the power indicator on the speaker array is on (white), indicating the

system is on, and that the status indicator is off.

If the Status indicator is blinking orange:

• There is no wireless connection between the speaker array and the

Acoustimass

• See the Troubleshooting table in the back of the operating guide and

follow the instructions for correcting the problem of "No Sound."

C. Put the ADAPTiQ

the left and right sensors rest above your ears.

During the audio calibration the headset allows the

CineMate

1 SR system to hear exactly what you

hear.

D. Slide the ADAPTiQ connector cover off the end of the speaker array.

ADAPTiQ button

E. Insert the ADAPTiQ

fully seated.

The status indicator on the speaker array will glow green and the ADAPTiQ

calibration system will start automatically.

18 – English

Status

module.

headset on your head making sure

ADAPTiQ headset connector

ADAPTiQ

ADAPTiQ connector cover

headset cable into the ADAPTiQ headset connector until it is

Power

Sensor