The remote control
On
Mute
Mute
Off
All
SOURCE / INPUT
CD/DVD
FM/AM
Tape
TV Input
TV
VCR
AUX
Power
Power
Power
MENU / NAVIGATION
DVD
Guide
Exit
Settings
Menu
Tune
Seek
Enter
Channel
Chapter
Volume
Preset
Track
1
2
3
4
5
6
7
8
9
Previous
0
PLAYBACK
Stop
Pause
Play
Shuffle
Repeat
AUDIO
Speakers
Surround
-
+
2-3-5
AM259776_01_V.pdf
The advanced radio-frequency remote control works from anywhere within most homes. Sim-
ply press the desired button. You do not need to aim the remote at the media center.
Note: Some types of buildings create "dead spots" where the remote will not operate. Move
the remote a foot or two and try again. You can also move the media center a few feet to a
location with better remote response, or extend the media center's power cord which contains
the antenna for the remote control.
Power on/off and mute controls
On
Turns the system on and off.
Off
Mute
Mutes the volume for all connected speakers (all zones and rooms).
All
Mutes/unmutes the volume in the current zone.
Mute
SOURCE/INPUT controls
Selects the built-in CD/DVD player and turns the system on.
CD/DVD
Selects the built-in FM/AM tuner and turns the system on to the previously-selected
FM/AM
station. Switches between FM and AM when the tuner is on.
Tape
Selects the TAPE source and turns the system on.
®
Note: Your LIFESTYLE
remote can be used to control your TV, VCR, or AUX device only after
it is programmed with the correct device code. See "Playing External Sources" on page 18.
Changes the external input to your TV. For example, your TV might have two exter-
TV Input
nal inputs, one of which you connect to your cable box and the other to a VCR. This
button will allow you to alternately switch between these two inputs.
To use this function, (1) your TV's remote control must have a similar control button,
and (2) your LIFESTYLE
TV - The top of this button turns your system on and selects your TV (if properly
TV
connected) as the sound source.
Power
Power – The bottom of this button turns your TV on and off.
VCR – The top of this button turns your system on and selects your VCR as the
VCR
sound source.
Power – The bottom of this button turns your VCR on and off.
Power
AUX – The top of this button turns your system on and selects the AUX input (such
AUX
as cable box or satellite receiver) as the sound source.
Power – The bottom of this button turns your AUX device on and off.
Power
October 30, 2001
Controls and Indicators
®
remote control must be programmed to control your TV.
7
Seite drucken