Bose Lifestyle 48 Series III Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Home Theater System Bose Lifestyle 48 Series III herunter. Bose Lifestyle 48 Series III 25 Seiten. Personal music center ii - owner's guide
Auch für Bose Lifestyle 48 Series III: Handbuch (29 seiten), Benutzerhandbuch (24 seiten), Benutzerhandbuch (13 seiten), Handbuch zur Schnelleinrichtung (3 seiten), Benutzerhandbuch (30 seiten)

Seite drucken

Bose Lifestyle 48 Series III Benutzerhandbuch

English

Español

Figure 5

Connection to a Bose link

amplifier, as an example

Français

For the receiver

1. Connect one end of the second Bose

OUTPUT on the receiver.

2. Connect the other end of the cable to the Bose link Input jack on the expansion room

system, amplifier, or powered speaker (Figure 5).

Status

Power

Receiver

Bose

link

OUTPUT

3. Insert the small plug on the power pack cable into the AC Power jack on the receiver and

plug the pack into a wall outlet.

The Status LED lights to verify this power connection.

Note: For information on the meaning of the different Status LED lights, refer to "Check the

indicators and settings" on page 8.

Instructions for non-Bose or older Bose products

The Bose link AL8 Homewide Wireless Audio Link also works with some products that are not

Bose link compatible.

You can use non-Bose products in the following ways:

• A tuner/receiver as a sound source connected to the transmitter or in an expansion room

connected to the receiver

• Powered speakers connected to the receiver

You can use older Bose products as follows:

• Powered speakers, a radio, or system with its own volume and on/off controls and line-

level female RCA input jacks connected to the receiver

Any of the above products require the use of an RCA to DIN adapter cable for connecting to

the transmitter, the receiver, or both. An adapter kit, which contains two of these cables, is

available from Bose.

Note: To order the adapter kit, contact Bose and request Part Number 285320-207. For Bose

contact information, refer to the address sheet included in the carton.

To use an adapter cable

The RCA connectors are color coded, red for right and white for left.

1. Insert the adapter cable DIN connector into the Bose

or receiver (OUTPUT) jack, as appropriate.

2. Insert the adapter cable RCA connectors into the Audio Out jack on the connection panel

of the audio source or the Audio In jack on the expansion room product. Match left to left

and right to right.

link A cable to the jack labeled Bose

LED

LIFESTYLE

SA-3 amplifier

Bose link

Bose link Output jack

Bose link

Input jack

A cable

link jack on the transmitter (INPUT)

ETUP

link