Bose CD Player Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Stereo System Bose CD Player herunter. Bose CD Player 31 Seiten. Radio/cd
Auch für Bose CD Player: Benutzerhandbuch (30 seiten)

Seite drucken

Setting Up

Installing the battery

Figure 2

Installing the battery

The 9-volt battery maintains clock and alarm settings and operates the Wave

backup alarm system for up to 24 hours, during a power loss or while the system is tempo-

rarily unplugged. Operating without this battery leaves the memory unprotected, but will not

harm the product.

Use a standard 9V battery (IEC 6F22 in Europe), available at most retail stores. Use an

alkaline battery for longer backup time.

Note: The battery does not provide power for Wave

CAUTION: Do not remove the tape from the top front of the system. It prevents the CD door

from opening accidentally when you turn the system over.

1. Carefully turn your system upside down.

2. Locate the battery compartment on the bottom (Figure 2).

3. Press the arrow on the cover to slide the compartment open.

4. Match the large (–) terminal on the battery to the small terminal on the clip (which lifts out

of the compartment for easier connection).

5. Snap the terminals together firmly.

6. Slide the cover closed.

Note: Now is a good time to record the serial number found on the bottom of your system.

Write it on your warranty card and in the space provided on page 3.

7. Turn the system right side up.

8. Remove the tape from the top front of the system.

CAUTION: After you remove the tape, be sure to remove any CD in the sytem before

turning the system over again. With no tape in place, the CD cover opens freely whenever

the system is turned upside down, so a CD could fall out and be damaged.

radio/CD's

radio/CD operation or for the display.