Bose B1 Benutzerhandbuch - Seite 22

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Bose B1 herunter. Bose B1 28 Seiten. Bass module
Auch für Bose B1: Installationshandbuch (21 seiten)

Seite drucken

Troubleshooting

Problem

System is plugged in,

power switch is on, but

power LED is off

Power LED is on (green),

but no sound

Power LED is red while the

PS1 power stand is on

House circuit breaker

keeps tripping

With nothing plugged into

the audio input or output

connectors on the rear

panel of the PS1 power

stand, a slight hum or buzz

is heard from the L1 or B1

B1 bass module is plugged

in, but no bass audio is

heard

B1 bass module sounds

out of balance with the

system

If you experience problems while using this product, try the following solutions. If you still

can't solve the problem, please call the Bose

Team direct at 877-335-2673 to arrange for service.

Recommended troubleshooting tools:

• Portable voltmeter

• Cable tester

• AC outlet tester

• XLR and ¼-inch phone plug cables

What to do

• Make sure you have power at the AC outlet. Try operating a lamp or other equipment

from the same AC outlet or test the outlet using an AC outlet tester.

• Make sure the PS1 power stand's power cord plug is fully inserted into the AC outlet.

• Check the line fuse on the PS1 power stand.

• Make sure volume control is turned up on your instrument.

• Make sure the applicable level control is turned up (Trim, or Channel 3/4 Level on the

PS1 power stand; CH 1/2 LEVEL and MASTER level on the R1 remote control).

• Make sure your instrument is plugged into the Channel 1/2 Input or Channel 3/4 Input

jack.

• Connect your instrument to the PS1 power stand using a different cable.

• Plug your instrument into a different amplifier to make sure the instrument is working.

• Please call Bose Live Music Customer Support at (877) 335-2673 for assistance.

• If you have more than one PS1 power stand plugged into the same AC circuit, stagger

the turn-on times. Each PS1 power stand has an inrush current of about 32 amps when

turned on.

• If you have more than three PS1 power stands plugged into a single 15 amp circuit,

move some systems to another AC circuit. Each PS1 power stand can draw 5 amps or

more when playing at high volumes for long periods of time.

• Using an AC outlet tester, test the AC outlet that the PS1 power stand is plugged into

for reversed or open (hot, neutral, and/or ground) contacts.

• If using an extension cord, make sure that the cord is also tested as above.

• Make sure you are using the (blue) B1 bass module 4-wire cable included with the B1

bass module.

• Make sure that the B1 bass module cable is plugged into the B1 Bass Module (Amp 3

OUT) jack on the PS1 power stand.

• Try a different 4-wire cable.

• Check that the B1 bass module cable connectors are fully engaged in the jacks.

• If available, try a different B1 bass module.

• Make sure you are using the (blue) B1 bass module 4-wire cable included with the B1

bass module package.

• Make sure that the B1 bass module grille is facing forward toward the musicians and

audience.

Live Music Product and Technical Support

• B1 bass module 4-wire cable (blue)

• Spare T15AH fuses

• Spare AC power cord