Bose PowerShare PS602P Installations- und Betriebshandbuch - Seite 16
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Verstärken Bose PowerShare PS602P herunter. Bose PowerShare PS602P 40 Seiten. Adaptable power amplifiers
Auch für Bose PowerShare PS602P: Installations- und Betriebshandbuch (40 seiten), Installations- und Betriebshandbuch (46 seiten)
Seite drucken
Introduction
Product Overview
This guide provides installation and operating information for Bose® PowerShare PS602, PS602P, and PS604 amplifiers.
Bose PowerShare adaptable power amplifiers deliver 600 watts for portable and fixed-install applications. Through
patented technology, total amplifier power is shared across all output channels, allowing installers the freedom to utilize
power where needed. With support for both low- and high-impedance loads up to 100V, PowerShare amplifiers adapt to a
wide range of applications. Onboard configurable loudspeaker processing and direct access to zone controllers eliminate
the need for an additional signal processor in many installations, while outstanding audio performance and reliability are
assured with patented technologies inherited from the field-proven PowerMatch® line. This unique set of features and
technologies makes PowerShare one of the most versatile high-performance amplifiers available.
Product Features
• PowerShare Technology
Patented PowerShare technology allows the total 600 watts of power to be shared asymmetrically across all outputs,
as each output is capable of delivering full power. Instead of selecting amplifier power based on the needs of the largest
zone, installers now have the freedom to use total amplifier power in the application. This enables more flexibility during
the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
• Load-Independent Outputs
Each channel can be configured for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging,
use of jumpers, or software settings.
• DFL
System
TM
The Dual Feedback Loop system, inherited from the field-proven Bose PowerMatch® amplifier line, improves performance
through continuous monitoring and control of both the current and voltage delivered to each output load. This
combination provides improved linearity and lower distortion, while protecting loudspeakers.
• Integrated Loudspeaker Processing with Optional PowerShare Editor Configuration
For applications requiring additional signal processing, the PowerShare Editor software offers real-time selection and
control of Bose loudspeaker EQs, 9-band PEQs, standard mixing, crossover, delay, and mute/output polarity through
a USB connection. For basic setups without a PC, rear-panel settings allow installers to recall Bose loudspeaker
equalization and protection per output channel. These features eliminate the need for an external signal processor in
many applications.
• ControlCenter Zone Controller Accessories
Bose ControlCenter CC-1 zone controllers can be directly attached for remote adjustment of amplifier outputs (models
PS602 and PS604 only), further extending stand-alone amplifier applications.
• Auto-Standby
Designed to save power consumption when not in use. PowerShare amplifiers can be configured to automatically enter
standby mode when the audio signal falls below a set threshold, then wake when audio returns.
• PowerShare Amplifier Series
The PowerShare family consists of three 1U amplifiers: 2- and 4-channel fixed-install models, and one 2-channel portable
model.
16 English
pro.Bose.com
Installation and Safety Guide