Bose 31952 Benutzerhandbuch - Seite 23

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kopfhörer Bose 31952 herunter. Bose 31952 43 Seiten. Aviation headset

Seite drucken

05_Using the headset.fm Page 19 Wednesday, December 1, 2010 12:17 PM

English

Tab 2, 10

Using the headset

with a Bluetooth

Pairing the headset with your phone

Pairing entails having the Bose A20 Aviation Headset in pairing mode, setting

your Bluetooth-enabled phone to "discover" the headset, then confirming the

connection on the phone. Before you use your Bose

with your mobile phone, you must pair the two devices.

1. Turn on the headset and make sure the multifunction switch is in the top or

middle position, NOT in the emergency off position.

Power

indicator light

Power button

Top position

The power indicator light glows green or yellow, depending on the charge

level of the battery. If the light is red, the battery is low and needs replacing.

2. Press the Bluetooth function button (to activate Bluetooth.

If this is the first time you've activated or are attempting

to pair Bluetooth, the Bluetooth indicator will flash at a

slow rate alternating with the Power indicator. This

indicates that the headset is in "discoverable" mode

and ready to be paired to a cell phone.

If the Bluetooth indicator does not flash alternately with the Power indicator

flash or you are trying to pair a headset that has previously been paired with

another phone, you will need to press and hold the Bluetooth function

button for 5 seconds in order to put the headset into "discoverable" mode.

3. With your Bluetooth-enabled phone turned on, locate the Bluetooth feature,

usually under Tools, Connect, or Bluetooth Devices. (Refer to the owner's

instructions that came with your phone for further details.)

4. Set the phone to "discover" or "add" a Bluetooth device. When Bose A20

appears in the list of devices, select and confirm this choice.

5. If you are asked for a passkey or PIN, enter the digits 0000.

The control module Bluetooth and power indicators flash together to confirm

successful pairing.

If pairing is unsuccessful, repeat steps 3 - 5 above.

Tab 3, 11

Tab 4, 12

-enabled phone

Multifunction Switch

Middle position

Tab 5, 13

Tab 6, 14

Tab 7, 15

A20™ Aviation Headset

Tab 8, 16

SING THE

EADSET

Bluetooth

indicator