Drolet The Hunter Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kochfeld Drolet The Hunter herunter. Drolet The Hunter 9 Seiten. Wood heater and cook stove
Auch für Drolet The Hunter: Benutzerhandbuch (11 seiten)
Assembling your HUNTER :
Fig. 1
Floor Protection:
Your wood stove has to be placed on a non-combustible surface. The following minimum
specifications must be respected :
NON-COMBUSTIBLE FLOOR PROTECTION
Thickness
1/4" (6 mm)
Clearances from combustible material :
Clearances from combustible material as described below must be scrupulously respected
upon installation.
CLEARANCES FROM COMBUSTIBLE MATERIAL
Back wall
48" (1220 mm)
* Height, from stove surface to ceiling.
1. Turn the stove upside down;
2. Screw the four (4) legs into place (see
3. Slide the heat shield between the four
4. Slide the heat baffle into place (inside
NOTE : You must slightly bend the sheet
metal in order to get the heat shield into
place.
facing upward.
Front
protrusion
18" (460 mm)
Side wall
48" (1220 mm)
Page 3 of 8
LEGS, HEAT SHIELD and FIRE
BAFFLE
fig. 1);
(4) legs and the bottom of your stove.
the firebox), just below the flue outlet.
Make sure that that the bumps on the
baffle are facing upward.
The heat shield's cross must be
Side
protrusions
8" (200 mm)
Corners
48" (1220 mm)
Rear
protrusion
8" (200 mm)
Height *
60" (1524 mm)