Dromida DB4.18 BL Handbuch für Montage und Wartung - Seite 13
Blättern Sie online oder laden Sie pdf Handbuch für Montage und Wartung für Motorisiertes Spielzeugauto Dromida DB4.18 BL herunter. Dromida DB4.18 BL 15 Seiten.
Seite drucken
PROGRAMMING
Running Mode: This function adjusts the running mode between forward/brake and forward/brake/reverse.
Drag Brake Force: This function adjusts the amount of drag brake applied at neutral throttle to simulate a slight
braking effect of a neutral brushed motor while coasting.
Low Voltage Cut-Off (LVC): This program is used to prevent the LiPo battery from over-discharging. The ESC
monitors the battery's voltage. At any time, if the battery's voltage is lower than the designated value, the output
power will be reduced to 50%. After 10 seconds the ESC will cut the motor power off.
Start Mode (Punch): This function adjusts the amount of initial power when the trigger is applied.
Maximum Brake Force: This program adjusts the amount of overall brake force applied when at full brake.
During programming the ESC the motor will emit a "beep" tone at the same time the LED flashes. A long time
flash and long "beep" represents "5" so it is easy to identify items with large numbers.
For example:
A long time flash (motor sounds "beeeep") equals a value of 5.
A long time flash + 1 short flash (motor sounds "beeeep-beep") equals a value of 6.
A long time flash + 2 short flashes (motor sounds "beeeep-beep-beep") equals a value of 7.
TO COMPLETE PROGRAMMING, SWITCH OFF THE ESC, AND THEN SWITCH IT ON