Drone Sky Hook ARROW DSH-SRD2-P4-3 Handbuch zur Schnellinstallation - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Drohne & Quadcopter Zubehör Drone Sky Hook ARROW DSH-SRD2-P4-3 herunter. Drone Sky Hook ARROW DSH-SRD2-P4-3 2 Seiten. Professional release & drop device for dji phantom 4 / phantom 3

Seite drucken

Model numbers: DSH-SRD2-P4-3; DSH-DRD2-P4-3; DSH-SRDP2-P4-3; DSH-DRDP2-P4-3

Quick Installation Guide - DJI Phantom 3 (all models)

Slide the alignment pin bracket

from the drone's inner side on

both rear landing gear

Align the Drone Sky Hook Arrow's

hole with the alignment pin and

press down on the Arrow until it

locks to the landing gear

The LED Sensors is installed under

the front right electric motor

Fully insert the plug of the LED

Sensor cable into the 'SENS' port

on the Drone Sky Hook Arrow

DRONE SKY HOOK Ltd.

For Installation and Operation videos visit

Drone-Sky-Hook - ARROW

Professional Release & Drop device for DJI Phantom 4 / Phantom 3

Turn the alignment pin bracket

towards the bottom side of the

landing gear until it locks

Press down the other side of the

Drone Sky Hook until it locks to the

landing gear

Slide the rubber band over the

motor and insert the pin to the

hole in the drone's arm

Verify that the alignment pin

bracket is in-line with the bottom

side of the landing gear

The locking pins should be fully

inserted

The LED Sensor should fully cover

the drone's lens

ALL SET !

www.droneskyhook.com/product-support

v1.2