Drone Sky Hook DSH-SRD2-P3 Kurzbedienungsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Kurzbedienungsanleitung für Drohne & Quadcopter Zubehör Drone Sky Hook DSH-SRD2-P3 herunter. Drone Sky Hook DSH-SRD2-P3 3 Seiten. Arrow single/dual release & drop for phantom 4 / phantom 3 series drones, arrow single/dual release & drop plus for phantom 4 / phantom 3 series drones

Seite drucken

Controlling the AUX Channel

DSH Models: Single Release & Drop PLUS / Dual Release & Drop PLUS

Operation Mode 1 – Drone Rotation

Remote Controller (Mode 2)

LEFT STICK

Operation Mode 2 – Drone Remote Controller C1/C2 Button and/or DJI App

Note: Use the DJI App to assign C1 or C2 button to Turn On/Off front LEDs

Remote Controller

C1 / C2 Button

DJI App

Settings – Main Controller Settings – Advanced Settings

Operation Mode 3 – Manual – FUNC button on DSH unit

DSH Release & Drop unit

IMPORTANT NOTE: At the end of each operation wait 3 seconds for the execution your command and before the initiation of the next command (False Command

Avoidance Algorithm (FCAA)).

DRONE SKY HOOK Ltd

For Installation and Operation videos visit

(DSH PLUS models only)

Quickly Rotate (YAW) the drone two full turns clockwise to command the AUX Channel to turn ON.

Quickly Rotate (YAW) the drone again two full turns clockwise to command the AUX Channel to turn OFF.

Press C1 or C2 three times in quick succession (while maintaining about 0.5-1 second between each press) to

command the AUX Channel to turn ON.

Press C1 or C2 three times again in quick (while maintaining about 0.5-1 second between each press) to command

the AUX Channel to turn OFF.

In the App menu switch the drone's front LEDs ON, then OFF and then back ON or OFF, then ON and then OFF.

(Total of one ON-OFF-ON or OFF-ON-OFF cycle) to simulate the operation of the C1 or C2 buttons on the drone's

remote controller (see above).

Maintain about 0.5-1 second idle duration between each switch operation.

Press three times the device's FUNC button to simulate the operation of the C1 or C2 buttons on the drone's remote

controller (see above).

Maintain about 0.5-1 second idle duration between each operation of the FUNC button.

www.droneskyhook.com/product-support

Operation