Drone-Clone Xperts QuadAir EXTREME Gebrauchsanweisung - Seite 4
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Drohnen Drone-Clone Xperts QuadAir EXTREME herunter. Drone-Clone Xperts QuadAir EXTREME 14 Seiten.
Seite drucken
Calibrating the QuadAir
control
Step 1: Turn on the remote controller;
•
2: Turn on your Drone by holding the power
button located on the top side of the drone.
Step 3: Place the drone on a horizontal
•
surface.
Step 4: Bind the transmitter with the drone
•
by pushing the throttle (left joystick) up to
the highest position, and then pulling it
straight down to lowest position
light will indicate successful bind.
Final Step: Move both sticks to lowest right
•
corner (like in the image above). LED lights
will start to flash rapidly. Wait a few seconds
till the lights are solid again and you are
done.
by remote
EXTREME
4
Step
•
. Solid