Elegoo Neptune3 Firmware-Update-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Firmware-Update-Handbuch für 3D-Drucker Elegoo Neptune3 herunter. Elegoo Neptune3 5 Seiten.

Pic 1

Reboot the power, wait until the firmware finish loading. The interface

shows like below after the firmware loads.(Screen firmware update time: around

70s)

 Motherboard firmware update：

Insert the TF card into the machine. Reboot the power, wait until the firmware

finish loading. The interface shows like pic3 when the firmware is loading. It will

enter the interface like pic4 once the firmware is updated.

Pic 2