anko XJ-14709C0 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Küchengeräte anko XJ-14709C0 herunter. anko XJ-14709C0 11 Seiten.

9. Plus (+) button

10. Minus (-) button

11. Set button

FIRST USE

Before the first use, please check if all the parts of the appliance are received in good undamaged

condition. If not, please return the product to Kmart for replacement.

1. Take the dehydrator out of the packaging.

2. Check to make sure that all parts are included.

3. Check whether the dehydrator or the individual parts exhibit any damage. If any parts are damaged

or missing, do not use the dehydrator.

BASIC CLEANING

1. Remove the packaging material and all protective foils.

2. Before first use, clean all parts of the dehydrator as described in the section "Cleaning and

Maintenance": cover (1) & drying trays (2) & base unit (3).

ASSEMBLING THE DEHYDRATOR

1. Place the base unit (3) on a dry, level, non-slip and heat-resistant surface located close to a socket.

2. Place a drying tray (2) on the base unit and stack as many drying trays on top of one another as

needed for the dehydration process.

Make sure that the drying tray without the opening in the middle is always in the topmost position.

3. Place the cover (1) on the top drying tray.

HEATING THE DEVICE BEFORE FIRST USE

To remove any residue from production, you have to heat up the dehydrator without any food for 1

hour before first use. Any odour that is emitted is normal and will disappear after a short time. This is

not a malfunction of the dehydrator. If this occurs, make sure that you open windows for adequate

ventilation.

1. Connect the supply cord plug (4) into a mains power outlet socket.

The indicator on the display (7) of the control panel (6) will start to blink.

2. Push the plus button (9) once.