Elektra Beckum PK 300 K Betriebsanleitung - Seite 4
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Säge Elektra Beckum PK 300 K herunter. Elektra Beckum PK 300 K 19 Seiten. Metabo precision circular saw operating instructions
Seite drucken
2
Standard Delivery
Saw blade TCT 300x2.6/1.8x30 mm 28 alternate bevel teeth
Riving knife 2.5 mm
Saw blade guard
Rip fence
Mitre fence
Dust extraction port with hoses
Push stick
Tool set
Operating instructions
3
Installation
Place machine upside down on two battens to install the workstand. Do not tighten screws fully before all parts have been
installed.
Install suction port to chip case.
Use 3 each
hex. head screw M 6x16
serrated lock washer Ø 6.4
hex. nut M 6
Install dust collection port into hole of the
rear panel with 3 each
hex. head screw M 6x16
serrated lock washer Ø 6.4
hex. nut M 6
Put a hex. nut M 10 on the threaded bolt
of all 4 adjustable feet.
Place spiral hose Ø 100 mm onto suction
port and secure with hose clamp Ø 100
mm. Install both side panels, using 4 each
hex. head screw M 6x16
serrated lock washer Ø 6.4
hex. nut M 6
Place the spiral hose on the dust collec-
tion port and secure in place with the
second hose clamp Ø 100 mm.
Install feet into tapped bushes M 10 lo-
cated on each corner.
17
Install rear panel (with hole) between the
side panels.
Use 6 each
hex. head screw M 6x16
serrated lock washer Ø 6.4
hex. nut M 6
Install the workstand's front panel.
Use 6 each
hex. head screw M 6x16
serrated lock washer Ø 6.4
hex. nut M 6
Now tighten all screw joints fully, then
stand machine on its feet. Place side
panels lids into the panel openings.