anko LD-K9030 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kessel anko LD-K9030 herunter. anko LD-K9030 10 Seiten.

3. Press the lid down to close it.



Make sure that the lid is closed properly.

4. Fully unwind the power cord and run it through the cable guide channel on the power base.

5. Place the kettle on the power base. Plug the mains cable into an earthed mains power outlet

socket that is within easy reach.

6. Press On/Off button to start boiling. The Temperature indicator will start flashing. When the

temperature reaches 100℃, there will be 3 beep sounds.

7. Four temperature level (70℃、80℃、90℃、100℃) can be selected by pressing the Temp

button. There will have a beep sound for each press. Once temperature has been selected,

automatic heating starts after approximately 10 seconds. When the selected temperature has

been reached, there will be 3 beep sounds.

8. Keep warm function is available for 70

the Keep Warm button once during water boiling or when the light is on after the boiling is

completed, the Keep Warm function will be activated. The temperature of the boiled water will

be maintained for 30 minutes. Press it again to disable the Keep Warm function.

WARNING: Risk of scalding from hot water & steam.

* Be sure that the water kettle is OFF before removing from the power base.

C, 80

C, and 90

C temperature settings only. Press