anko VC8260-12A Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Staubsauger anko VC8260-12A herunter. anko VC8260-12A 12 Seiten.

STORAGE

Assemble the handheld unit with

vacuum stand, fold the handle and

place it against the wall.

Wall Mount

There is a wall mount accessory

supplied with screws and wall

plugs if you prefer to stand the

vacuum cleaner against the wall.

To install the wall mount, position

it on the wall and at a suitable

height where can hold the handle.

Mark the two screw holes through

onto the wall using a suitable drill

(wood drill bit for timber wall, or

masonry drill bit for brick /

concrete walls, drill three holes

Ø6mm and 35 - 40mm deep.

Insert the plastic wall plugs into

each hole and gently hammer in

until they are flush with the wall,

place the hanging mount over the

holes, then insert the screws and

tighten up. Do Not Overtighten

1 0