anko VCB45-16A Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Staubsauger anko VCB45-16A herunter. anko VCB45-16A 15 Seiten.

4 Before first use

1. Remove all packaging materials from the product. Dispose of all the packaging

materials in an appropriate way. Contact your local authorities about collection points

or waste separation.

2. Check the shipment for completeness and possible shipping damage. In case of

shipping damage or incomplete shipment, contact Kmart for replacement.

3. Please save the original packaging. Use it to store the appliance when not in use

for an extended period of time.

4. At delivery the vacuum cleaner is already fitted with a dust bag. Seven extra

separate dust bags are included with the product. To ensure there is a dust bag

installed in the product, press the cover release button (25) to open the cover (23) to

access the dust bag compartment. To insert a new dust bag, follow the instructions

under 7.1 "Dust bag replacement".

NOTE: The cover cannot be closed if no dust bag is installed in the product.

5. Check that the motor filter and exhaust filter is in place. To access the filters,

follow the instructions under 7.2 "Filter maintenance".

1. Insert the suction hose adaptor (28) into the suction hose inlet (26) until it locks in

place. While connecting press the suction hose release buttons (27) on the suction

hose adaptor. To remove the suction hose, press the suction hose release buttons

and pull out the suction hose.

2. Attach the telescopic suction tube (14) to the end of the handle (12) until

it is firmly connected.

3. Extend the telescopic suction tube by pushing the tube release slide (15)

downwards. Release the tube release slide as soon as the required length of tube

has been reached. Make sure it locks into position.

4. Attach the combination nozzle (19) or the 2 in 1 crevice/brush nozzle (20) or the

upholstery tool (22) to the end of the telescopic suction tube.